How to calm cooler on the CPU?

0 like 0 dislike
8 views
I used to watch videos on the iPhone using the Air Video program. It works as follows. The "server" part standing on PC live convert video to MP4 and broadcasts it via WiFi to the phone. Everything works fine and suits me except for the howls of the system unit. The system is based on the motherboard Gigabyte GA-P35-DS3L.

Is there any way to increase the threshold of the exit of the cooler at high speed or to optimize its work. It works awful, five seconds starts to howl then 10 ceases, and everything is repeated again.
by | 8 views

7 Answers

0 like 0 dislike
I'm not the topic, I was just wondering. Is there such a bad monitor that you look at your iPhone?
by
0 like 0 dislike
A few steps that I believe should help.
\r
1. To put the program SpeedFan to check the temperature of the CPU during conversion. Temperature over 50 degrees is the disorder. Prevents cooling adds noise and dust that clogged the radiator and cooler.
\r
2. Vacuum the insides of a computer. Separately remove the radiator and cooler, clean them, after cleaning, degrease the surface of the chip and heatsink and applying thermal compound to return the radiator with the cooler in place. Then lubricate the bearing of the cooler, dropping on it with engine oil. Eventually there clogged with dust, even at low revs noticeably cooler starts to make noise.
\r
3. If there is an external video card has a meaning to do with the radiator and cooler similarly to 2.
\r
4. If you have case fans, then they should also clean and lubricate their bearings.
\r
5. Power supply, if under warranty, vacuum clean the outside through the air vent. If not, then open the case and clean it from dust. Then lubricate the bearing on the fan of the power supply.
\r
Reduced fan speed may cause an emergency shutdown for inadmissible overheating. You should use this method with caution, especially with computers whose system units are clogged with dust.
by
0 like 0 dislike
To put a normal CPU cooler is complete? ;-)
by
0 like 0 dislike
No update iron:
To reduce the power and frequency of the processor to the level that it would be just enough for the conversion.
\r
With update iron:
To put another cooling boooolshoy radiator.
by
0 like 0 dislike
Add to the above, as an option: supply a manual speed control, sold in many computer stores.
by
0 like 0 dislike
Look for the menu item in the BIOS settings, if no such item, then update the firmware. I recently such variant helped.
by
0 like 0 dislike
In this motherboard it is possible to specify in the BIOS the maximum fan speed. I advise to inspect the computer for the presence of dust in the coolers. ;)
by
110,608 questions
257,186 answers
0 comments
28,881 users