When you enable mpd5 on Freebsd 9.1 decreases the output speed of the Internet connection to clients and the VPN server. Where to dig?


Warning: count(): Parameter must be an array or an object that implements Countable in /home/styllloz/public_html/qa-theme/donut-theme/qa-donut-layer.php on line 274
0 like 0 dislike
7 views
Configured on a Freebsd 9.1 server on vpn mpd5 (5.6 Version). Lived VPN server, everything was fine. Updated the server a very long time, since it fulfills all three functions, and the need to upgrade was not. Recently noticed a very quick drop in the speed of the Internet connection, mpd5, and on the server and clients connected via the VPN. Turning off MPD5 - all fire. Has anyone encountered a similar problem? Network cards changed to the new - has not produced results.
mpd.conf
#
# MPD configuration file
#
# This file defines the configuration for mpd: what the
# bundles are, what the links are in those bundles, how
# the interface should be configured, various PPP parameters,
# etc. It contains commands just as you would type them
# in at the console. Lines without labels are padding. Lines
# starting with a "#" are comments.
#
# $Id: mpd.conf.sample,v 1.46 2009/04/29 11:04:17 amotin Exp $
#
#################################################################

startup:
# ▒▒▒▒▒▒ ▒▒▒▒▒▒ ▒▒▒ ▒▒▒▒▒▒▒ ▒ web intarface
# ▒.▒ ▒▒▒▒▒▒ password ▒▒ ▒▒▒▒ ▒▒▒▒▒▒
set user admin password admin
# set user password cancer
# configure the console
set console self 127.0.0.1 5005
set console open
# configure the web server
set web self 0.0.0.0 5006
set web open

default:
load pptp_server

pptp_server:
# ▒▒▒▒▒▒▒▒ IP ▒▒▒▒▒▒▒▒,
# ▒▒▒▒▒▒▒ ▒▒▒▒▒▒▒▒▒▒ VPN ▒▒▒▒▒▒▒.
set ippool add pool1 192.168.100.50 192.168.100.99

# Create clonable bundle template named B
create bundle template B
set iface enable proxy-arp
set iface idle 0
set iface enable tcpmssfix
set ipcp yes vjcomp
# Specify IP address pool for dynamic assigment.
set ipcp ranges 192.168.100.1/32 ippool pool1
set ipcp dns 192.168.0.14
# The five lines below enable Microsoft Point-to-Point encryption
# (MPPE) using the ng_mppc(8) netgraph node type.
set bundle enable compression
& mppc set ccp yes
set & mppc yes e40
set & mppc yes e128
set & mppc yes stateless
# Create clonable link template named L
create link template L pptp
# Set bundle template to use
set link action bundle B
# Multilink adds some overhead, but gives full 1500 MTU.
set link enable multilink
set link yes acfcomp protocomp
set link no pap chap eap
set link enable chap
set link keep-alive 10 60
# We reducing link mtu to avoid GRE packet fragmentation
set link mtu 1456
# Configure PPTP
# ▒▒▒▒▒▒▒ IP ▒▒ ▒▒▒▒▒▒▒ ▒▒▒▒▒ ▒▒▒▒▒▒▒▒▒▒▒▒▒ ▒▒▒▒▒▒▒▒▒▒
set pptp self X. X. X. x
# set pptp self 10.0.0.2
# Allow to accept calls
set link enable incoming

Prompt where to dig? Google already a month struby, anything sensible and specific on this issue were not found.
Need additional information - please send without problems.
by | 7 views

2 Answers

0 like 0 dislike
Little input data. Customers to the Internet through the same VPN server go when you connect?
by
0 like 0 dislike
Yes, customers use the Internet VPN server. Client, in fact two, and more is required. The original data any more interested?
by

Related questions

0 like 0 dislike
2 answers
0 like 0 dislike
6 answers
110,608 questions
257,186 answers
0 comments
27,889 users